Advanced Solutions Every Waste Water Treatment Company Can Rely On

A modern Waste Water Treatment Company must address increasing demands for efficiency, regulatory compliance, and environmental protection. Effective disinfection and odor control are central to these goals, which is why advanced technologies such as GO2™ chlorine dioxide are becoming essential in wastewater treatment operations.

GO2™ is highly effective as both a disinfectant and an oxidant, offering several chemical advantages over traditional chlorine. Unlike chlorine, GO2™ does not significantly hydrolyze in water, allowing it to retain strong biocidal activity across a wide pH range. This stability enables a Waste Water Treatment Company to achieve consistent treatment performance even when water conditions fluctuate.

A modern Waste Water Treatment Company must address increasing demands for efficiency, regulatory compliance, and environmental protection. Effective disinfection and odor control are central to these goals, which is why advanced technologies such as GO2™ chlorine dioxide are becoming essential in wastewater treatment operations.

GO2™ is highly effective as both a disinfectant and an oxidant, offering several chemical advantages over traditional chlorine. Unlike chlorine, GO2™ does not significantly hydrolyze in water, allowing it to retain strong biocidal activity across a wide pH range. This stability enables a Waste Water Treatment Company to achieve consistent treatment performance even when water conditions fluctuate.

Dosage flexibility is another key benefit. Required dosages depend on contamination levels and water quality, but for most municipal and industrial systems, a GO2™ residual concentration of up to 5 ppm is sufficient for reliable disinfection. For sulfide odor control within a pH range of 5 to 9, a minimum of 5.2 ppm of GO2™ effectively oxidizes 1 ppm of sulfide. Phenol removal is also precise, requiring 1.5 ppm of GO2™ to oxidize 1 ppm of phenol at pH levels below 8, and 3.3 ppm at pH levels above 10.

Odor control is a major concern for any Waste Water Treatment Company, especially in densely populated or industrial areas. GO2™ is non-reactive with ammonia and most nitrogen-containing compounds, making it effective at lower doses than chlorine. It destroys sulfides without forming colloidal sulfur, eliminating unpleasant odors while avoiding secondary treatment issues. GO2™ also oxidizes phenols, simple cyanides, iron, and manganese, contributing to improved effluent quality.

The method of dosing GO2™ is simple and efficient. By combining its two components with an appropriate volume of tap water, a 3% chlorine dioxide solution is produced. For optimal results, GO2™ should be applied at a point that ensures thorough mixing and uniform distribution. The feed point must be well below the water level to prevent volatilization, and co-incident feeding with lime or powdered activated carbon should be avoided.

Accurate monitoring is essential for effective operation. Residual chlorine dioxide levels must be measured using validated analytical methods specific to chlorine dioxide, including the DPD-Glycine Method (4500-ClO₂ D) and the Amperometric Method II (4500-ClO₂ E), as outlined in Standard Methods.

By integrating GO2™ technology, a forward-thinking Waste Water Treatment Company can achieve superior disinfection, reliable odor control, and consistent compliance, ensuring safe and sustainable wastewater management.